NADAMOO Tub and Tile Spray Paint White, 450ml，2 Cans
Refinishing Porcelain Fiberglass and Ceramic Surfaces
* The spray coating cures and becomes hard like a semi-gloss porcelain finish providing superior abrasion and scratch resistance. Great for high humidity environment.
* Tack free in 2-4 hours; allow surface to dry for 3 days prior to water exposure; 3 days for maximum hardness.
* 2 cans cover about 25-35 sq. ft (2 light coats). Allow first light coat to become tacky (wait about 10 minute) before applying the second coat.
* NADAMOO spray paint is here to re-glaze porcelain surfaces so that you can make your bathroom look like new without having to spend a lot of time and costs replacing tiles and bathtubs. Please note that it has a strong odor. It is recommended to wear a mask and ensure that the area is well ventilated.
The product has a strong odor, it is recommended to wear a mask and ensure that the area is well ventilated.
>>>> Spray paint the surface, give it a fresh and new look
_____________________________________________________
Your glazed bathtub or sink could get various stains and chips from hard water, soap, oil, and shampoo. Normally a household cannot frequently replace the bathtub, sink .
If you want to give your shower tub, sink or tiles new life, you can depend on NADAMOO Tub & Tile Spray Paint.
Try to spray paint the surface, give it a fresh and new look and protect your bathtub for a very long time.
.
>>>> Smooth, semi-gloss, porcelain-like, waterproof finish
_____________________________________________________
This durable solution hides flaws and applies smoothly to give your surfaces a semi-glossy sheen.
NOTE: No high gloss.
>>>> Steps:
_____________________________________________________
1. Prepare Surface: Remove hardware and caulk. Clean and sand the surface. If there are any shearing distortions or dimples, holes, then repair it and smooth it.
2. Mask off surrounding surface.
3. Shake the can for about 2 minutes to fully mix the solution inside the can.
4. Spray back and forth, slightly overlapping each stroke and holding the can 10 to 16 inches away from the surface.
.
>>>> NOTE:
_____________________________________________________
The use of this paint is not limited to porcelain. Additionally, it works well on various surfaces, including ceramics, fiberglass, stone, cement, plaster, hardwood, and plastic.
How to Prevent Paint from Bubbling or Peeling？
.
>>>> Before Painting：
_______________________
1. Make sure the surface is clean and completely dry.
2. Polish thoroughly the entire surface with a “rough” sandpaper, wire brush
3. Avoid painting in hot or humid conditions. Ensure the suitable indoor temperature（50 to 85 ℉)， Humidity (< 75% )
.
>>>> In the process：
_______________________
Don‘t spray too much paint at a time. Applied excessively thick will cause the coat to dry unevenly. You may thought the new finish is dry but actually the bulk of the paint film underneath remains soft and uncured with less exposure to the atmosphere.
It is better to apply several thin layers of paint and let it dry in between coats.
.
>>>> After painting：
_______________________
It is recommended to wait the full cure time of 3 days （time it takes for finish to reach its maximum hardness）before exposing the surface to moisture.
Q: What does 450ml of Spray paint cover?
A: Normally, a 450ml can of spray paint covers almost 12 to 17 square feet for 2 light coats. Coverage may vary depending on the thickness of the application and the number of coats you will spray. It also depends on the amount of overspray you generate.
You may plan for an additional 1 to 2 coats to get the better results. Please count the additional coatings in.
For example：
Shower Pan: 40" x 40", 2 cans for 3-4 coats；
Alcove tub： 60“x 32“，Height: 18“，4 cans for 3-4 coats. ( Internal surfaces )；
Oval tub：60“ x 41“，Height: 24“，8 cans for 3-4 coats. ( Internal and external surfaces );